WATCH Dog

The WATCH Dog is an ultra-high-performance, compact, passive subwoofer. There’s a widespread myth that since subwoofers operate in the low to subsonic frequency range, the sonic quality of the amplifier used to drive them is not critical. Couple that with the fact that FTC-mandated criteria for power amplifier specifications don’t apply to active subwoofers—a loophole which allows manufacturers to wildly inflate performance claims for what are, in many cases (no pun intended) the severely sub-standard amplifiers built into their subwoofers.

The WATCH Dog is an ultra-high-performance, compact, passive subwoofer. There’s a widespread myth that since subwoofers operate in the low to subsonic frequency range, the sonic quality of the amplifier used to drive them is not critical. Couple that with the fact that FTC-mandated criteria for power amplifier specifications don’t apply to active subwoofers—a loophole which allows manufacturers to wildly inflate performance claims for what are, in many cases (no pun intended) the severely sub-standard amplifiers built into their subwoofers.

When designing the WATCH Dog, special attention was paid to the driver itself. This proprietary twelve-inch woofer was specifically optimized for the two bottom octaves of the audible bandwidth. The driver features a dual spider design, triangulating its geometry (the third variable being the cone’s surround) such that the high-excursion cone can only move pistonically.

Specifications

Drivers
Woofer
12 inch Dual Spider (30.48 cm)
Measurements
Sensitivity
83 dB @ 1 watt @ 1m @ 100 Hz
Nominal Impedance
8 ohms, minimum 5.6 ohms @ 1 kHz
Minimum Amplifier Power
200 watts (for theater applications)
Frequency Response
15Hz – 300Hz Room Average Response [RAR]
Overall Dimensions
Height (w/spikes)
26.875 inches, (68.26 cm)
Width
18 inches (45.72 cm)
Depth
25.125 inches (63.82 cm)
Total Shipping Weight (approx)
281 lbs (127.5 kg)